What to Turn Off Your Main Water Valve: Easy Guide
What to Turn Off Your Main Water Valve: Easy Guide
Blog Article
Just about everyone will have their own individual piece of advice in relation to How to Locate & Turn Off Main Water Shut-Off Valves.
One of the most usual places a water main will certainly be found in house remains in your boiler room, basement, or a removed panel in a section for your residence.
When you locate the water pipe you will simply turn the valve clockwise to shut all the water off in your home up until you have completed the repair service. Some houses will certainly have a ball valve with a lever that you can pull rather than count on close the water off.
If you try to shut the water off to your fixtures by using an angle stop which doesn't function you will certainly have to shut of the water main to make your repair work. There are likewise numerous other reasons you might need to close the water main like fixing frozen pipes, repairing leaks, replacing fixtures or taps.
Many individuals are not aware that they also have a water pipe valve right in their very own residence and just call a plumber of never wind up doing the repair work up until points obtain really negative due to the fact that they simply do not know that shutting the water main is really easy.
How to Find and Shut Off Main Water Shutoff Valve
Where is the main water shutoff valve located?
This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.
How to Turn Off Main Water Valve
Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.
If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.
Where are the isolation valves?
Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.
Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.
Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.
Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.
https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/
Hopefully you enjoyed our section about How to Turn of. Thank you for taking a few minutes to read our content. Do you know about another person who is occupied with How to Turn Off the Water in an Emergency? Be sure share it. Thank you for taking the time to read it.
Services Report this page